Skip to main content

SRRL Quality Assessment Tests


60-MIN QA Tests
July 1981 ~ March 1985
InstrumentTest
Global, Diffuse,
and Direct Normal		SERI_QC
All other instrumentsSee NREL Technical Report TP-463-5217 (3.25 MB PDF)


5-MIN QA Tests
April 1985 ~ December 1996
(where applicable)
InstrumentTest
Global, Diffuse (SB corrected),
and Direct Normal		QC_TND
Temp Roof-20o <= Temp <= 60o C
Relative Humidity1% <= RH <= 100%
Wind Speed0 <= WS <= 60 m/s
Wind Direction0 <= WD <= 360o
Station Pressure600 <= Press <= 1000 mBar
Global 40S/2Ax/1Ax/Refl,
Global 90 N/E/S/W,
Global/Direct RG780		IF Sun is UP: 0 <= Radiometer <= 1.1 * Solar Const
IF Sun is DN: 0 <= Radiometer <= 10 W/m2
Total UV Horiz(Above test) AND TUVH <= 0.6*GH
500nm PhotometerIF Sun is UP: 0 <= Photometer <= 5000 Counts
IF Sun is DN: 0 <= Photometer <= 10 Counts


5-MIN QA Tests
January 1997 ~ December 1998
InstrumentTest
Global, Diffuse (SB corrected),
and Direct Normal		SERI_QC *
Temp Roof/Tower-40o <= Temp <= 60o C
Relative Humidity1% <= RH <= 100%
Avg/Pk Wind Speed0 <= WS <= 60 m/s
Wind Direction0 <= WD <= 360o
Station Pressure600 <= Press <= 1000 mBar
Global 40-South-15 <= G40 <= 1100 W/m2
Global Normal-15 <= GN <= 1400 W/m2
Global Horiz RG780-15 <= GH780 <= 660 W/m2
Direct Normal RG780-15 <= DN780 <= 840 W/m2
Total UV Horiz-10 <= TUVH/GH <= 0.6
Direct Normal UV-10 <= UVD/TUVH <= 1
Reflected Global-10 <= REFG/GH <= 1
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
January 1999 ~ July 2000
InstrumentTest
Global, Diffuse (SB corrected),
and Direct Normal		SERI_QC *
Temp Roof/Tower/8-48-40o <= Temp <= 60o C
Relative Humidity1% <= RH <= 100%
Avg/Pk Wind Speed0 <= WS <= 60 m/s
Wind Direction0 <= WD <= 360o
Station Pressure700 <= Press <= 900 mBar
Global 40-South-15 <= G40 <= 1100 W/m2
Global Normal-15 <= GN <= 1400 W/m2
Global Horiz RG780-15 <= GH780 <= 660 W/m2
Direct Normal RG780-15 <= DN780 <= 840 W/m2
Global Horiz UV-10 <= UVG/GH <= 0.6
Direct Normal UV-10 <= UVD/DN <= 0.6
Reflected Global-10 <= REFG/GH <= 1
Upwelling IR200 <= UWIR <= 650 W/m2
Downwelling IR100 <= DWIR <= 400 W/m2
Global LI-200, Diffuse 8-48,
and Direct (Secondary)		SERI_QC
Diffuse SD-15 <= DSD <= 600 W/m2
Temp CR32X0o <= Temp <= 35o C
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
August 2000 ~ October 2000
InstrumentTest
Global PSP, Direct NIP, and Diffuse PSPSERI_QC *
Air Temp-40o <= Temp <= 60oC
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
November 2000 ~ July 2001
InstrumentTest
LI-200 #1, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
LI-200 #2, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
PSP, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent), NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, PSP (SB)SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, PSPSERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, PSP (ThermCor)SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, 8-48SERI_QC (Global, Direct, Diffuse) *
UPWelling PIR, DNWelling PIRLongWave Test: CF1=NIP2, CF2=PSP (V/ZCor), CF3=8-48
    F1=200, F2=700, F3=150, F4=450
Temp Deck/Tower-40o <= Temp <= 60oC
RH Deck/Tower0.25% <= RH <= 105%
Station Pressure712 <= Press <= 912 mBar
Est. SeaLevel Pressure912 <= Press <= 1112 mBar
Avg Wind Speed (all)0 <= WS <= 60 m/s
Gust Wind Speed (all)0 <= WS <= 80 m/s
Wind Direction (all)0 <= WD <= 360o
Precipitation0 <= RAIN <= 20 mm
Photometer 368nm †0 <= PHT <= 1.0 W/m2
Photometer 500nm (both) †0 <= PHT <= 1.7 W/m2
Photometer 675nm †0 <= PHT <= 1.4 W/m2
Photometer 778nm †0 <= PHT <= 1.1 W/m2
Tubidity/AOD (all) †0.005 <= AOD <= 2
UVE-Index0 <= UVE <= 12
UVE-MEDs0 <= UVE <= 5 MED/hr
Albedo (Eppley) †0 <= Albedo <= 1.05
Net Atmos. IR (Eppley)-500 <= Net_IR <= 250 W/m2
Net Radiation (Eppley)-500 <= Net_RAD <= 1617 W/m2
Global RG780 †0.05 <= PSP_RG780/PSP_Vent <= 0.6
Direct RG780 †0.05 <= NIP_RG780/NIP_#2 <= 0.9
Global Normal †0.1 <= CM21/PSP_40S <= 50
Global 40-South (both) †0.8 <= LI200_40S/PSP_40S <= 1.2 (and visa-versa)
UPWelling PSP †0.01 <= PSP_UW/PSP_Vent <= 1.05
Global TUVR, CUVA1 †0.8 <= TUVR/CUVA1 <= 1.2 (and visa-versa)
Global CUVB1 †0.8 <= CUVB1/MS210W <= 1.2
Global MS210W †0.8 <= MS210W/UVB1 <= 1.2
Global UVB-1 †0.8 <= UVB1/501A <= 1.2
Global 501A †0.8 <= 501A/CUVB1 <= 1.2
Direct TUVR, CUVA2 †0.2 <= TUVR/CUVA2 <= 1.8 (and visa-versa)
Direct CUVB2 †0.001 <= CUVB2/CUVA2 <= 0.04
†These instruments were tested only during daylight hours, nightime values were flagged as untested ("00").
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
August 2001 ~ December 2005
InstrumentTest
LI-200 #1, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
LI-200 #2, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
SP-Lite, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
CM3, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
CM6b, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
CM22, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse) [added 6/2005]
TSP-1, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
TSP-700, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse) [added 1/2004]
PSP, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent), NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), LI-201, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), CH1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, PSP (SB)SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, CM22SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, PSPSERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, PSP (ThermCor)SERI_QC (Global, Direct, Diffuse)
PSP (Vent/ZenCor), NIP #2, 8-48SERI_QC (Global, Direct, Diffuse) *
UPWelling PIR, DNWelling CG4LongWave Test: CF1=NIP2, CF2=PSP (V/ZCor), CF3=8-48
    F1=200, F2=700, F3=150, F4=450
UPWelling PIR, DNWelling PIRLongWave Test: CF1=NIP2, CF2=PSP (V/ZCor), CF3=8-48
    F1=200, F2=700, F3=150, F4=450
UPWelling CG3, DNWelling CG3LongWave Test: CF1=NIP2, CF2=PSP (V/ZCor), CF3=8-48
    F1=200, F2=700, F3=150, F4=450
Dry Bulb Temp Deck/Tower-40o <= Temp <= 60oC
Temp WindChill/DewPoint/WetBulb -60o <= Temp <= 60oC
RH Deck/Tower0.25% <= RH <= 105%
Cloud Cover Total/Opaque †0 <= Cover <= 100% (added 8/2004)
Station Pressure712 <= Press <= 912 mBar
Est. SeaLevel Pressure912 <= Press <= 1112 mBar
Avg Wind Speed (all)0 <= WS <= 60 m/s
Gust Wind Speed (all)0 <= WS <= 80 m/s
Wind Direction (all)0 <= WD <= 360o
Precipitation0 <= RAIN <= 20 mm
Wind Shear-2 <= SHEAR <= 4 1/s
Photometer 368nm †0 <= PHT <= 1.0 W/m2
Photometer 500nm (both) †0 <= PHT <= 1.7 W/m2
Photometer 675nm †0 <= PHT <= 1.4 W/m2
Photometer 778nm †0 <= PHT <= 1.1 W/m2
Tubidity/AOD (all) †0.005 <= AOD <= 2
UVE-Index0 <= UVE <= 12
UVE-MEDs0 <= UVE <= 5 MED/hr
Global RG780 †0.05 <= PSP_RG780/PSP_Vent <= 0.6
Direct RG780 †0.05 <= NIP_RG780/NIP_#2 <= 0.9
Global LI-190 †1.1 <= LI190/LI200_#2 <= 5 (before 1/2004)
0.98 <= Glo_LI190/UW_LI190 <= 50 (1/2004 & after)
Global Normal †0.1 <= CM21/PSP_40S <= 50
Global 40-South (both) †0.8 <= LI200/PSP <= 1.2 (and visa-versa)
Global 90-North (both) †0.8 <= LI200/PSP <= 1.2 (and visa-versa) [added 1/2004]
Global 90-East (both) †0.8 <= LI200/PSP <= 1.2 (and visa-versa) [added 1/2004]
Global 90-South (both) †0.8 <= LI200/PSP <= 1.2 (and visa-versa) [added 1/2004]
Global 90-West (both) †0.8 <= LI200/PSP <= 1.2 (and visa-versa) [added 1/2004]
UPWelling PSP† 0.01 <= PSP_UW/PSP_Vent <= 1.05 (before 7/2002)
UPWelling ShortWave Test (7/2002 & after)
UPWelling CM3† 0.01 <= CM3_UW/CM3 <= 1.05 (before 7/2002)
UPWelling ShortWave Test (7/2002 & after)
UPWelling LI-200UPWelling ShortWave Test (added 1/2004)
UPWelling LI-190 †0.02 <= UW_LI190/Glo_LI190 <= 1.08 (added 1/2004)
Albedo CNR1, PSP †0.5 <= CNR1/PSP <= 1.5 (and visa-versa)
Albedo LI-200 †0.5 <= LI200/PSP <= 1.5 (added 1/2004)
Albedo LI-190 †0.1 <= LI190/LI200 <= 1.5 (added 1/2004)
Net Atmos. IR (both)0.6 <= CNR1/Eppley <= 1.4 (and visa-versa)
Net Radiation (both)0.4 <= CNR1/Eppley <= 1.6 (and visa-versa)
Global TUVR †0.8 <= TUVR/UVSAT <= 1.2
Global UV-S-A-T, CUVA1 †0.8 <= UVSAT/CUVA1 <= 1.2 (and visa-versa)
Global UV-S-B-T †0.8 <= UVSBT/CUVB1 <= 1.2 (before 10/2002)
0.7 <= UVSBT/UVB1 <= 1.3 (10/2002 & after)
Global 501A †0.8 <= 501A/UVSBT <= 1.2 (before 10/2002)
0.7 <= 501A/UVSBT <= 1.3 (10/2002 & after)
Global UVB-1 †0.8 <= UVB1/501A <= 1.2 (before 10/2002)
0.7 <= UVB1/501A <= 1.3 (10/2002 & after)
Global MS210W †0.8 <= MS210W/UVB1 <= 1.2 (before 10/2002)
0.7 <= MS210W/UVB1 <= 1.3 (10/2002 & after)
Global CUVB1 †0.8 <= CUVB1/MS210W <= 1.2 (before 10/2002)
0.5 <= CUVB1/MS210W <= 1.3 (10/2002 & after)
Direct TUVR, CUVA2 †0.2 <= TUVR/CUVA2 <= 1.8 (and visa-versa)
Direct CUVB2 †0.001 <= CUVB2/CUVA2 <= 0.04
Diffuse UVB-1 †0.1 <= Dif_UVB1/Glo_UVB1 <= 1.2
†These instruments were tested only during daylight hours, nightime values were flagged as untested ("00").
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
January 2006 ~ December 2014
InstrumentTest
LI-200, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
PYR-P, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
SP-Lite, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
CM3, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
CM6b, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
TSP-1, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
TSP-700, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Corr.), CH1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent), CH1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP (Vent/Corr.), CH1, 8-48SERI_QC (Global, Direct, Diffuse)
SPN1, CH1, 8-48SERI_QC (Global, Direct, Diffuse)
CM22, LI-201, 8-48SERI_QC (Global, Direct, Diffuse)
CM22, NIP #1, 8-48SERI_QC (Global, Direct, Diffuse)
CM22, NIP #2, 8-48SERI_QC (Global, Direct, Diffuse)
CM22, MS-56, 8-48SERI_QC (Global, Direct, Diffuse) [added 1/2014]
CM22, CH1, Dif PSP (SB)SERI_QC (Global, Direct, Diffuse)
CM22, CH1, Dif CM22SERI_QC (Global, Direct, Diffuse)
CM22, CH1, Dif PSPSERI_QC (Global, Direct, Diffuse)
CM22, CH1, Dif PSP (ThermCor)SERI_QC (Global, Direct, Diffuse)
CM22, CH1, Dif SPN1SERI_QC (Global, Direct, Diffuse)
CM22, CH1, 8-48SERI_QC (Global, Direct, Diffuse) *
UPWelling PIR, DNWelling CG4LongWave Test: CF1=CH1, CF2=CM22, CF3=8-48
    F1=200, F2=700, F3=150, F4=450
UPWelling PIR, DNWelling PIRLongWave Test: CF1=CH1, CF2=CM22, CF3=8-48
    F1=200, F2=700, F3=150, F4=450
UPWelling CG3, DNWelling CG3LongWave Test: CF1=CH1, CF2=CM22, CF3=8-48
    F1=200, F2=700, F3=150, F4=450
Dry Bulb Temperature (all)-40o <= Temp <= 60oC
Temp WindChill/DewPoint/WetBulb -60o <= Temp <= 60oC
Relative Humidity (all)0.25% <= RH <= 105%
Cloud Cover Total/Opaque †0 <= Cover <= 100%
Station Pressure712 <= Press <= 912 mBar
Est. SeaLevel Pressure912 <= Press <= 1112 mBar
Avg Wind Speed (all)0 <= WS <= 60 m/s
Gust Wind Speed (all)0 <= WS <= 80 m/s
Wind Direction (all)0 <= WD <= 360o
Precipitation0 <= RAIN <= 20 mm
Snow Depth-2 <= SNOW <= 152 cm
Atmos. Electric Field Monitor-19.8 <= EFM <= 19.8 kV/m (added 10/2010)
Wind Shear-2 <= SHEAR <= 4 1/s
Tubidity/AOD (all) †0.001 <= AOD <= 5
PWV †0 <= PWV <= 5 (added 7/2008)
UVE-Index-0.12 <= UVE <= 12
UVE-MEDs-0.05 <= UVE <= 5 MED/hr
SE-POA Angle-60o <= Angle <= 60o (added 11/2011)
Global RG780 †0.02 <= PSP_RG780/PSP_Vent <= 0.65
Direct RG780 †0.02 <= NIP_RG780/NIP_#1 <= 0.9
Global LI-190 †0.98 <= Glo_LI190/UW_LI190 <= 50
Direct LI-190 †0.05 <= Dir_LI190/Dir_LI201 <= 1000 (added 6/2012)
Global LI-210 †0.01 <= Glo_LI210/Glo_LI200 <= 0.5
Global Normal †0.1 <= CM21/PSP_40S <= 50
Global 40-South PSP †0.6 <= PSP/LI200 <= 1.2
Global 40-South LI-200 †0.8 <= LI200/PSP <= 1.4
Global 90-North PSP †0.5 <= PSP/LI200 <= 1.2
Global 90-North LI-200 †0.8 <= LI200/PSP <= 1.5
Global 90-East PSP †0.5 <= PSP/LI200 <= 1.2
Global 90-East LI-200 †0.8 <= LI200/PSP <= 1.5
Global 90-South PSP †0.5 <= PSP/LI200 <= 1.2
Global 90-South LI-200 †0.8 <= LI200/PSP <= 1.5
Global 90-West PSP †0.5 <= PSP/LI200 <= 1.2
Global 90-West LI-200 †0.8 <= LI200/PSP <= 1.5
Global SE-POA LI-200 †0.8 <= SEPOA/Glo_LI200 <= 4 (added 11/2011)
Zebra PSP †0.02 <= Zebra/Glo_PSP <= 1.2 (added 7/2008)
UPWelling PSPUPWelling ShortWave Test
UPWelling CM3UPWelling ShortWave Test
UPWelling LI-200UPWelling ShortWave Test
UPWelling LI-190 †0.02 <= UW_LI190/Glo_LI190 <= 1.08
Albedo CNR1, PSP †0.3 <= CNR1/PSP <= 1.7 (and visa-versa)
Albedo LI-200 †0.3 <= LI200/PSP <= 1.7
Albedo LI-190 †0.1 <= LI190/LI200 <= 1.5
Net Atmos. IR (both)0.5 <= CNR1/Eppley <= 1.5 (and visa-versa)
Net Radiation (both)0.2 <= CNR1/Eppley <= 1.8 (and visa-versa)
Global TUVR †0.7 <= TUVR/UVSAT <= 1.3
Global CUV4 †0.7 <= CUV4/UVSAT <= 1.3 (added 7/2008)
Global UV-S-A-T, CUVA1 †0.7 <= UVSAT/CUVA1 <= 1.3 (and visa-versa)
Global UV-S-B-T †0.6 <= UVSBT/UVB1 <= 1.4
Global 501A †0.6 <= 501A/UVSBT <= 1.4
Global UVB-1 †0.6 <= UVB1/501A <= 1.4
Global MS210W †0.6 <= MS210W/UVB1 <= 1.4
Global CUVB1 †0.4 <= CUVB1/MS210W <= 1.4
Direct TUVR, CUVA2 †0.1 <= TUVR/CUVA2 <= 1.9 (and visa-versa)
Direct CUVB2 †0.0005 <= CUVB2/CUVA2 <= 0.05
Diffuse UVB-1 †0.1 <= Dif_UVB1/Glo_UVB1 <= 1.2
†These instruments were tested only during daylight hours, nightime values were flagged as untested ("00").
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
January 2015 ~ December 2018
InstrumentTest
SP-110, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
LI-200, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
LI-200R, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
ML-01, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
SP-Lite2, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
SPN1, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse) [removed 12/2017]
SP-510, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse) [added 12/2017]
TSP-700, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
GPP, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
PSP, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
SPP, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
MS602, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
MS410, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
MS802, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
SR25, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse) [added 8/2016]
MS80, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse) [added 12/2017]
CM3, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
CM6b, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
CM11, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22-2, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22-1, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, LI-201, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, MS-56, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, DR02, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, NIP, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, sNIP, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-2, 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif SPN1SERI_QC (Global, Direct, Diffuse) [removed 12/2017]
CMP22V, CHP1-1, Dif SBandSERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif CMP11SERI_QC (Global, Direct, Diffuse) [removed 12/2017]
CMP22V, CHP1-1, Dif SR25SERI_QC (Global, Direct, Diffuse) [added 12/2017]
CMP22V, CHP1-1, Dif CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif CM22-1SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, 8-48SERI_QC (Global, Direct, Diffuse) *
All Others (Jan 2015-Nov 2017)MIDC_QC (min/max and instrument delta,
excluding SERI_QC instruments above)
All Others (Dec 2017-Present)MIDC_QC (min/max and instrument delta,
excluding SERI_QC instruments above)
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


1-MIN QA Tests
January 2019 ~ Present
InstrumentTest
SP-110, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
LI-200, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
LI-200R, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
ML-01, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
SP-Lite2, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
SP-510, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
TSP-700, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
GPP, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
PSP, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
SPP, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
MS602, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
MS410, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
MS802, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
SR20, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse) [added 01/2024]
SR25, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
MS80, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
CM3, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
CM6b, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
CM11, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22-2, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22-1, CHP1-1, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, LI-201, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, MS-56, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, DR02, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, DR20, CM22-2SERI_QC (Global, Direct, Diffuse) [added 01/2024]
CMP22V, NIP, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, sNIP, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-2, CM22-2SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif SBandSERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif SPPSERI_QC (Global, Direct, Diffuse) [01/2020 - 12/2023]
CMP22V, CHP1-1, Dif SR20SERI_QC (Global, Direct, Diffuse) [added 01/2024]
CMP22V, CHP1-1, Dif SR25SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif 8-48SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif CM22-1SERI_QC (Global, Direct, Diffuse)
CMP22V, CHP1-1, Dif CM22-2SERI_QC (Global, Direct, Diffuse) *
All Others (Dec 2017-Dec 2019)MIDC_QC (min/max and instrument delta,
excluding SERI_QC instruments above)
All Others (Jan 2020-Dec 2023)MIDC_QC (min/max and instrument delta,
excluding SERI_QC instruments above)
All Others (Jan 2024-Present)MIDC_QC (min/max and instrument delta,
excluding SERI_QC instruments above)
* These 3 SERI_QC tested instruments are used for the Cylinder and QCFit plots.


[NREL] [MIDC] [SRRL BMS]