SRRL PV FT-Samp Current Data

SRRL PV Resource (FT-Samples)
Current Irradiance and Meteorological Conditions

April 29, 2024
21:27 MST
Entire Day Daytime

IRRADIANCE

Global 40-South CMP11 (Samp)	-2.55	W/m²
Global 40-South IKS-MONO (Samp)	0.00	W/m²
Global 40-South IKS-POLY (Samp)	0.00	W/m²
Global 40-South IKS-AMOR (Samp)	0.00	W/m²
Global 40-South NES-MONO (Samp)	0.00	W/m²
Global 40-South NES-POLY (Samp)	0.00	W/m²
Global 40-South IMT (Samp)	0.00	W/m²
Global 40-South FRA (Samp)	0.00	W/m²
Global 40-South EET-MONO (Samp)	0.00	W/m²
Global 40-South ATO-MONO (Samp)	0.74	W/m²
Global 40-South ATO-MONO (Samp/Dig)	0.00	W/m²
Global 40-South ATO-CDTE (Samp)	1.25	W/m²
Global 40-South ATO-CDTE (Samp/Dig)	0.00	W/m²
IKS-M 40S Signal	0.00	mV
IKS-P 40S Signal	0.00	mV
IKS-A 40S Signal	0.00	mV
NES-M 40S Signal	0.00	mV
NES-P 40S Signal	0.00	mV
IMT 40S Signal	0.00	mV
FRA 40S Signal	0.00	mV
EET-M 40S Signal	0.00	mV
ATO-M 40S Signal	0.68	mV
ATO-C 40S Signal	0.68	mV
ATO-M 40S Signal (Dig)	-1.37	mA
ATO-C 40S Signal (Dig)	-1.43	mA

METEOROLOGICAL

IKS-M 40S Temp	10.71	^oC
IKS-P 40S Temp	10.46	^oC
IKS-A 40S Temp	11.05	^oC
NES-M 40S Temp	10.19	^oC
NES-P 40S Temp	10.05	^oC
IMT 40S Temp	10.46	^oC
FRA 40S Temp	11.21	^oC
EET-M 40S Temp	10.39	^oC
ATO-M 40S Temp	12.56	^oC
ATO-M 40S Temp (Dig)	12.82	^oC
ATO-C 40S Temp	11.83	^oC
ATO-C 40S Temp (Dig)	12.09	^oC
Logger Temp	12.67	^oC
Logger Battery	13.94	VDC
Logger Pgm. Time	2.15	s
Zenith Angle	115.02	^o
Azimuth Angle	319.26	^o

Output Type: Selected 1-Min Data (ASCII Text)
Selected Hourly Data (ASCII Text)
Selected Daily Statistics (ASCII Text)
All 1-Min Raw Data (ASCII Text)
"Live" Raw Data (ASCII Text)
Selected Display (HTML)
Selected Plot

Black & White Plot
English Conversion (Meteorological)

GENERATE CUSTOM DATA

	User-defined calculation using an instrument and another instrument or value:

	Calculate the third irradiance component using global, direct, or diffuse:

No custom data

Select y-axis primary secondary

Check all shortwave: Global Horiz

Data is automatically updated every 3 minutes.
(ENABLE automatic browser refresh.)

Notice: Any publication based in whole or in part on these data sets should conspicuously acknowledge the data source as the National Renewable Energy Laboratory using the citation and DOI listed on the bottom of the SRRL PV FT-Samp homepage.
Notice: If you find this service valuable, have suggestions, or any other comments, please complete this Feedback Request. (150 KB DOCX)
Notice: Data have not been reviewed for accuracy or completeness. Please read the disclaimer.
To determine instrument measurement uncertainty, please download the Excel® uncertainty spreadsheet to compute these values. (5.5 MB XLSX)
Further instrument information, including current serial numbers and calibration factors, are available by clicking the instrument name. Some of these serial numbers can also be clicked for further instrument calibration history and uncertainties.
Irradiance data will always appear on primary axis and meteorological data will always appear on secondary axis.
Selected data or all raw data has the option of being compressed using the ZIP format. An extraction utility can be obtained from PKWare or WinZip
Selected hourly data will generate hourly data by averaging the input data for the entire day(s), custom data will be ignored. Note: DO NOT use this feature with wind direction measurements, the resulting averages will be bogus.
Selected daily statistics will generate daily totals (for irradiance data) and daily averages (for meteorological data) using the input data for the entire day(s), custom data will be ignored. The daily maximum and minimum (if applicable) will also be generated. Note: Negative values from shortwave irradiance instruments will be set to zero when accumulating daily totals. DO NOT use this feature with wind direction measurements, the resulting averages will be bogus.
The raw data options are the complete raw data record(s) from the datalogger, these are the raw data field IDs.
"Live" raw data is a single record from the most recent data collection and all raw data is all the data from midnight to the latest record.
Selected display will generate a customized data display, similar to the above table, custom data will be ignored.
English conversion only applies to selected data or plot and has no effect on irradiance or custom data.
When selecting raw data or wind rose, all selections (except the date) will be ignored.
The calculate third component option uses the formula: Global = Direct * Cosine(Zenith) + Diffuse to calculate a third component based on the selected two. This option should only be used for pyrheliometers and horizontal pyranometers.
For automated data extraction, please use the MIDC API.

[NREL] [MIDC] [SRRL PV FT-Samp]

SRRL PV Resource (FT-Samples) Current Irradiance and Meteorological Conditions

SRRL PV Resource (FT-Samples)
Current Irradiance and Meteorological Conditions