Oahu Archive Instrument Descriptions and Histories


Model Measurement
Notes (below)		 Units Location Pakbus Latitude Longitude Sensor
SN		 CF
W/m2/mV
LI-200 Global Horizontal (17) W/m2 DHHL_3 201 21.31236 -158.08463 PY66499 141.76
DHHL_4 202 21.31303 -158.08505 PY66500 118.01
DHHL_5 203 21.31357 -158.08424 PY66501 104.46
DHHL_10 204 21.31183 -158.08554 PY66502 109.06
DHHL_11 205 21.31042 -158.0853 PY66503 114.71
DHHL_9 206 21.31268 -158.08688 PY66504 141.92
DHHL_2 207 21.31451 -158.08534 PY66505 106.39
DHHL_1 208 21.31533 -158.087 PY66519 107.34
AP_6 209 21.30812 -158.07935 PY66521 117.34
AP_1 210 21.31276 -158.08389 PY66523 110.4
AP_3 211 21.31281 -158.08163 PY66524 113.55
AP_5 212 21.30983 -158.08249 PY66525 116.04
AP_4 213 21.31141 -158.07947 PY66526 107.58
AP_7 214 21.31478 -158.07785 PY66527 117.61
DHHL_6 215 21.31179 -158.08678 PY66528 112.83
DHHL_7 216 21.31418 -158.08685 PY66529 114.04
DHHL_8 217 21.31034 -158.08675 PY66530 117.75
Measured using a LICOR LI-200 Pyranometer mounted on an a 7 foot tripod mounted on ground. Voltage is measured across a 100 Ohm precision resistor in parallel to sensor output. This satellite photo shows the location of each measurement station.
LI-200 Global Tilt (2) W/m2 DHHL_1 208 21.31533 -158.087 PY66520 122.51
AP_6 209 21.30812 -158.07935 PY66522 109.48
Measured using a LICOR LI-200 Pyranometer mounted at a 45 degree west tilt on an a 7 foot tripod mounted on ground. Voltage is measured across a 100 Ohm precision resistor in parallel to sensor output.
RSR2 Global Horizontal, Direct Normal, and Diffuse Horizontal (RSR) W/m2 AP_2 230 21.31349 -158.08249 - -
Measured by SOLRMAP Kalaeloa Oahu RSR, see the Kalaeloa Oahu RSR Instrument page for more information.
Notes:
  • Data Sample rate for Global Horizontal and Tilt is every 1 second with 1 second outputs (data only collected from 5:00 to 20:00 HST)..
  • Data Sample rate for RSR Global Horizontal, Direct Normal and Diffuse Horizontal is every 3 seconds with 3 second outputs (data only collected from 5:00 to 20:00 HST)..
  • The CR800 is a table based operating system, data tables of equal output rate are merged together and converted to array ("classic") Campbell format after data collection, also any non-numeric values are converted to -99999.

[NREL] [MIDC] [Oahu Archive]