Solar tracker base |
Preparing base for solar tracker installation |
Powering up solar tracker |
Installing split loom to protect instrument signal cables |
Routing signal cables from instruments to data logger enclosure |
Data logger, pressure sensor, and battery mounted to the side of tracker base inside weatherproof enclosure |
Solar tracker and instruments installed |
2AP solar tracker with Eppley 8-48, which measures diffuse, mounted under the shading ball. The Kipp & Zonen CMP22 (right) measures global horizontal. |
2AP solar tracker with Kipp & Zonen CH1 (lower right) measuring direct normal. |
Lowering meteorological tower |
Raising meteorological tower with wind sensors installed |
Close up of wind speed, direction, and lightning rod |
Rain gauge |
Temperature and relative humidity probe inside a naturally aspirated radiation shield |
SolarTAC entrance sign |
SolarTAC measurement station, view looking to the north |
SolarTAC measurement station, view looking to the north east |
SolarTAC measurement station, view looking to the east |
SolarTAC measurement station, view looking to the south east |
SolarTAC measurement station, view looking to the south |
SolarTAC measurement station, view looking to the south west |
SolarTAC measurement station, view looking to the west |
SolarTAC measurement station, view looking to the north west |